Author of this article: He Xiaoyi
I have n’t evaluated the switch socket for more than a year. For friends who are demanded in this part, please search -weep blood decoration and understand the related switch brands and series evaluation articles I made before
Some time ago, Double Eleven, a lot of friends left a message to me, asking the question of the switch, while Double Eleven I started the single opening and five -hole of the 5 brands, disassembled it together to compare it, and make a friend who needed it. refer to
Xiaoyu’s 叨: This article is very long, hundreds of pictures, friends who need or may need to collect it first, and then go out slowly when needed. This article will include the most on the market. Five common electrical brands of “borderless” switch sockets, anxious friends can pull to the last watch and summarize, but it is more recommended to see the content of each evaluation, which will not be subjective by me. Factors affect, evaluate manual measurement, there are certain errors, please forgive me
You will see this article: Luoglang Yiyuan, Schneider Yishang, Bull G29 Crystal, Siemens Risi and Simon E7
1. Brand and series introduction
2. Comparison of appearance decoration
3. Comparison of materials, wiring methods and structures
4. Comparison of metal parts after disassembly
5. Burning test
6. The summary section that must be seen
The full text score is 5 points for each score
Then we started, 6 neat cartons, of which the Bulls were divided into two parcels and shipped.
Brand and series introduction
First introduce the players who play this time, namely
Player No. 1 -Rog Langyu Yuan Suyue Bai is referred to as Logland
Rogue is an international switching giant. After the domestic acquisition of TCL International Electrician, many remarkable series have been released. For example, the Shi Dian, which was previously evaluated, is also a new work of Loglant.
Positioning high -end, second only to the entire imported Ott
He has up
The combination of ten kinds of materials and colors presents the infinite possibilities of the Roger’s high -end customized series for customers
When choosing to evaluate the product, in fact, I have a soft spot for the metal brushed black and cowhide series, but after all, after all, the evaluation is still controlled. Yes, if the family uses it, I am happy to try the product of the metal brushed and the leather noodles
Rog Loglans switch socket panel Yiyuan Moon Bai 5, two -hole two -hole 16A air conditioner USB home inserted 28.5 yuan
Tmall selection
Buy
二号选手——施耐德绎尚白下文简称施耐德
Schneider’s reputation in the switching industry may not be as good as the power distribution industry. Through the efforts of the past few years, they have also stood firm in the retail electricity industry. After Schneider entered the Chinese market, it has acquired Qisheng, Meilan Rilan, Dunsie, Duncie, Duncie, Duncie, Duncie, Duncie, Duncie, Dunza, Duncie, Duncie, Delixie and other electrician brands have achieved great achievements in product design, research and development, and channel sales. It is still the middle and high -end products that Schneider has been on fire in the past two or three years. This product once scored high in my evaluation. It is also a series of Schneider’s main sales.
When choosing a product, there is no diverse custom or painted pattern. I still choose the most popular white panel. The golden color is actually better, but the price is about twice as white
Schneider switch socket panel Xiechai series mirror porcelain white 16A switch single open single opening single control 20.02 yuan
Jingdong
Player No. 3 -Bulls G29 Crystal Platform, referred to as Bulls
As an old -fashioned enterprise, Bulls have been involved in the wall switch market in recent years. Relying on the sales strategies of huge sales networks and rural surrounding cities, they quickly occupy a certain share in the wall switch field. Bulls’ products are in domestic brands It can be regarded as remarkable. The slogan of the bull -wall decoration experts, overwhelmed, disassembled several series of its series. Although the performance is not very good, as a domestic brand, the balance is still relatively good. , Especially this series selected this time, the appearance is really very deeply impressed by people
As of my article, I do n’t know why the links of this series have been removed. The price I bought is more than 80. At this price, EMMMMM is really not pretty. It is said that the surface is inlaid.
Bull switch socket panel G29 series rose gold 86 dark -loading wall wall power supply one open two open three -open dual -control power supply switch panel
Player No. 4 -Siemens Rui Zhizhizhi as referred to as Siemens below
In addition to being a leading brand in the power distribution industry, Siemens can achieve close to 100 billion sales by relying on a single series in the wall switch industry. It is not bad! Ruizhi is a high -end series of Siemens. Although this series of listing sales for 5 years, the life cycle has not shown signs of downhill. It is still the representative of the large border switch in people’s minds. It is a series that must be selected
Siemens switch socket panel one open single -control single -opening single -opening single -connected series ivory white titanium silver wise switch 26.74 yuan
Player No. 5 -Simon E7 Based referred to as Simon
When it comes to Simon, the brand of Simon is also very interesting. 1912 originated from Barcelona as his slogan. Is it from Barcelona and we will not be sophisticated. His place of origin is in Haian, Jiangsu. In terms of brand communication, Simon is also based on designers and home improvement channels. This E7 product large board is simple. It is also a remarkable series in the entire product series of Simon, but this time In the evaluation, he is the only big board switch with a border
Simon switch socket home 5, five -hole two -three plugs E7 elegant white smart USB dark installation socket panel porous porous one open single -control switch 53 yuan
Comparison of appearance decoration
Aspect
Only Rog Log Lagram made a carton anti -collision protection, and the central packaging carton received was perfect.
As a mid -to -high -end series of 5 brands, Rogron, Bulls, and Siemens are all packaged in carton, which are packed in plastic bags.
In terms of switching protection, the surface of the Rog Lang switch socket is a double -layer PC design. It uses the protection of the scratch resistance of the film. When it is installed, when it is used, the blue decoration bar on the left is actually silver. , Blue is a scratch -resistant film, which can be designed very intimate
Schneider, Bull, and Siemens switch sockets are protected by plastic shell packaging. Simon has no protection
Packaging scores: Rogron, Siemens, Bulls are 5 points, Schneider 4 points, Simon 3 points
Finally, I opened the veil to see the appearance. The appearance is a kind of project. There will be some subjective factors. Please treat it correctly.
No. 1 player Rog Lang’s Yiyuan
Switch -The overall appearance is a large plate of right -angle, the surface double -layer PC processing, smooth and flat, the white PC surface on the bottom is transparent PC, which is very glass texture, but it seems not so heavy. It is very eye -catching. On the side, a little color is added on the overall white panel, which looks more fashionable.
The decorative strip on the left is silver, because the reflective light can’t take the effect a bit. Look at the picture below, it looks still very fashionable and beautiful
The minimum thickness of the effect of the switch on the side of the switch is 11.23cm. Because the double -layer PC, the overall thickness is relatively expected
The socket -the surface of this five -hole is still a double -layer PC, flat and smooth, and it looks very effective. I personally think that the appearance is particularly prominent on this socket. In the lower left corner, the logo in the lower right corner of the routine looks new.
The distance between the five -hole and 3 holes is relatively large, which can reach 20.89mm, which is the big and five holes that are often mentioned in the industry.
You can insert two -hole and three -hole plugs at the same time, so that the five -hole is no longer embarrassing
The thickness of the socket is 10.6mm
The second player Schneider
Switch -The overall switch of Yishang is rounded, which looks more rounded. At the same time, the sense of fashion will be reduced. The white PC surface is smooth but the texture is still different than that of Rogue. , Below there is a “chin”. This is a pain point of the Zhishang switch very much. When we switch the lights, the hand will slide down to touch the switch involuntarily. When you encounter it, you will feel 50 points. Essence It’s very uncomfortable
Due to the structure of the large curved plate, the overall thickness control is ideal. The thickness of the minimum angle of the switch is only 9.75mm.
The socket -the five -hole of Yi Shang is still relatively beautiful, because it is consistent with the switching style. There is a horizontal segmentation at the bottom, and the style of the entire socket has a little more elegant taste on the basis
Although it is also the design of the big five -hole, the distance between the two -hole and the three -hole is 16.32mm, which is much worse than Yiyuan. The logo tradition is in the lower right corner.
Insert three -hole and two -hole plugs at the same time, it really doesn’t work. This is a bit embarrassing. The price of five holes is spent, only the right to use 2 holes/3 holes
The thickness of the socket is 9.92cm, which is well controlled
No. 3 Player Bulls
Switch -Bulls This switch is really a bunker. When I choose, I probably did not pay attention to the crystal on the surface? I really ca n’t evaluate the appearance. When I opened it, a strong local tyrant fell down the wind, and I looked at a few Swarovski. Essence Let ’s take a look together. The overall color is dark gold. The golden color is not particularly pure. It feels a bit red. There are 9 crystals on it. The price of more than 80 is really a bit more expensive for a switch. , The price is too low
The fluorescent dot is in the upper left corner, the switch is rounded as a whole, not only four corners, but also slightly curved on the surface. The logo is silver -plated.
From the side, the side is also the feeling of round bags. The overall is relatively heavy, and the feel and sound are relatively dull.
Due to the round design of the Bull, the overall thickness also looks more material. The minimum angle thickness of the switch has reached 11.98cm nearly 12cm
The socket -the only oblique five -hole socket in the five models. The earliest oblique five -hole ABB is to facilitate the two -hole and three -hole plugs at the same time, but in actual use, there is not much time to insert at the same time, and the time is not much time, and it is not much time to insert at the same time, and it is not much time to insert at the same time. In continuous improvement, most manufacturers have found that the big five holes can not only insert at the same time, but also can be more perfect in appearance and wiring behind the appearance and behind. More or less rivet, there are hidden safety hazards, so most large factories are still making five holes and not oblique five holes. I also hope that friends will not blindly obsessed with oblique five -hole. Five holes are still better than oblique five holes
The overall sockets are consistent with the performance of the switch. They are all round and heavy. There are no broken drills on the surface, but it also looks very local.
Because the two -hole and three -hole are designed with oblique five -hole, it can be inserted at the same time, or the distance is 18.21mm.
The oblique five -hole can definitely insert 2 or 3 holes at the same time
The thickness of the socket is 9.92cm
No. 4 player Siemensi
Switch -As the first creator of the borderless switch, the design of Siemens is still remarkable. First of all, the pure white PC surface, the four corners of the small arc, the gray logo in the lower left corner, the overall appearance is very generous and stylish
If you look at it from the side, you can see a gray border, yo, it turns out that the color matching design
The thickness of the minimum angle of the Siemens switch is 11.18mm
The socket -five -hole is first and the big five -hole design, with thin gray edges on the side, proper color combination, good -looking
The distance between the two -hole and the three -hole is 18.21mm, EMMMMM, which is much smaller than Roggon
However, you can also insert 2 holes and 3 holes plugs at the same time
The thickness of the socket is only 8.36, it can be said that it is controlled very well
No. 5 player Simon E7
Switch -Simon’s E7 series is a large plate switch, but it is not the most popular borderless frame. It has a frame, and it is still a thick frame. On the lower corner border, not shot
From the side, it looks quite thick
Simon is mainly the design of the border, but the actually thickness is only 10.95mm less than 11mm.
The socket -it looks like a large five -hole design, but the distance is smaller than the other four, only 16.07mm, because the frame is brought, so it looks thicker
Unable to insert two -hole and three -hole plug at the same time
The thickness of the socket is 10.57mm
Switching and socket appearance scores: Rog Lang, Schneider, Siemens 5 points, Simon 4 points, bulls 2 points
Five -hole spacing score: Rogron 5 points, bulls and Siemens 4 points, Schneider and Simon 3 points
Switch and socket thickness score: Schneider 5 points, Loglans, Schneider, Bull and Simon 4 points
Materials, wiring methods and structure
In terms of materials, because the structure and design of each brand are a little different, they cannot simply compare the differences in numbers. I can be used as a reference. In terms of materials, I have made some weighs and important parts of each important part. Then look down
The first is the overall weight. The heavier the better, it can only show that the material is more sufficient, but because the types of materials are different, the data is for reference only
No. 1 player Roglan Rogue, the switch weighs 93.6g, the socket weighs 89.7G
Schneider No. 2, the switch weighs 78.8g, the socket weighs 77.1g
No. 3 player bull, switch weighing 107.3g, socket weighing 102.7
No. 4 player Siemens switch weighs 77.9g, and the socket weighs 75.3g
No. 5 player Simon, the switch weighs 96.3g, the socket weighs 113.4g
The switch socket rough weight score: 5 points in the bull, Simon 4 points, Rog Loglans 3 points, Schneider 2 points, Siemens 1 point
Next, let’s take a look at the structure of the switch and socket
Five players sitting up
The first is switch
From the figure below, five switches
All have enhanced mesh tendons
The structure of Rog Loglans and Schneider are better. Siemens and Simon are slightly worse.
The volume of the back seat of the five switches
Buy
Buy
Buy
Buy
Jingdong
Jingdong
Jingdong
Schneider
The rear seat of the Bulls is the largest and larger in the back seat. When installation, it is limited to whether the developer’s bottom box is not standard and soft and hard line, including the craftsmanship of the electrician master.
Switch back seat volume score: Schneider 5 points, Siemens 4 points, Simon 3 points, Loglans 2 points, bulls 1 point
The structure of the switch of the No. 1 player Rog Lang is more reasonable. First of all, the load of his load from the front is 16A. You can bring a larger lamp load. Wiring, this is also the best of the current three types of wiring methods. In terms of fixed screws, the left and right adjustable screw holes are added to the basis of the fixed hole of each screw of the top and bottom, which can meet the humanized needs of fine -tuning. You can also fix the base firmly
The production date is printed at the bottom, which is quite fresh, No. 6.30
From the side, the back seat is buckle type. This is currently a relatively common rear seat buckle form. It will not be too difficult to remove it.
From the perspective of it, the screw is a universal screw of the cross, and the material should be an ordinary alloy
The second player Schneider, the back seat structure of the switching and switch is slightly inferior to Loglance. Although it is also a 16A load, the screw wiring method is still easier to slip than the saddle terminal. There are only printed models and batches on the switch. There is no production date. It may be printed on the packaging bag. I don’t know if this will cause trouble for after -sales.
From the top, the screws are also universal screws in one word and cross. Go back to use it normally, but the dismantling will be very troublesome, I can’t wait to dismantle violence, hahaha
The third player Bull, the bull’s conscience than I imagined, is also a 16A load. Like Schneider, it uses screw pressure lines to adjust the screw holes. Although it may be installed and less than four, it is not more prepared than used without using it.
From the side, the deduction structure of the rear seat is the same as that of Rogue
From the perspective of it, the screw is also common in one word and cross
Siemens No. 4, frankly, Siemens Rui Zhi still disappointed me. After all, it was the founder of the once -free frame, but within 5 years after the release, there was really no improvement. Use more and more. Essence
The 16A load, the screw pressure line structure, the two adjustment holes are very narrow. I believe that it will encounter trouble when installation. There is no fixed screw hole position. To the non -standard bottom box or wall surface, the installation will encounter a lot of trouble
The back seat buckle design on the side is similar to that of Rogger and the Bulls. It is slightly more difficult to disassemble. This picture can be seen in the back of the back more intuitively. It is really unreasonable.
Looking at the screws from above are universal screws, alloy materials
Fifth player Simon, Simon’s series, uses steel back panel, has no enhanced muscles, 16A load, and the saddle terminal wiring like Roggon, the screw adjustment hole is one on the left and right.
From the perspective of it, the screw is also made of alloy, common screw
The outer buckle on the side is the same as Rog Lang and the bull. Because the steel bottom plate is used, the bottom surface also looks very flat.
Switching wiring scores: Rog Lang, Simon 5 points, Schneider, Bull 4 points, Siemens 3 points
Adjust the holes and other detail scores: Rog Lang 5 points, Schneider, Bulls 4 points, Simon and Siemens 3 points
Then there is the comparison of the socket
From the perspective of the figure below, the design of the oblique five -hole design is the biggest of the bulls in the back seat. The back seats of the other four brands are almost the same size. Among them Schneider, Simon uses the bottom plate of the steel structure, so there is no reinforcement design. The flattering and enhanced tendon design of the base is Siemens.
First of all, let’s find out that the 10A and 16A and the 10A and 16A of the switch are different. The switches now basically have a load of 16A, which is convenient for bringing greater loads. There is no pressure on LED lamps. The 10A load switch must be inferior to 16A in this regard, and 10A and 16A of the socket are two load specifications of each brand. 10A is the ordinary triangle plug. 16A is the air conditioner plug.
Because we tested five holes, all 10A, and I won’t repeat it later.
The volume score of the back seat of the five -hole socket: Rog Lang, Schneider, Siemens, Simon 4 points, Bulls 3 points
No. 1 player Roglans
First of all, the three rows of the screw holes are the tilt terminal design. This design is very user -friendly, because the installation of the socket is often low. The tilt wiring terminal is suitable for the electrician when installation. Consistent with the switch, it is a saddle terminal wiring, which can press more thicker thicker diameter. The left and right screws are adjusted. The four corners are fixed with screws. It is very convenient to disassemble, the reinforcement is dense, and it is still very good
The production date is fresh, September 14th
No. 2 player Schneider
Schneider’s socket back seat design still uses the same screw pressure line as the switch. There is no advanced saddling terminal, which is easier to slide. The screw adjustment hole position is left and right. Without the humanization of Rog Logland, the rear seat and the base are buckle -type connection methods. It is difficult to disassemble than screws. It is difficult to dismantle it in the end. Essence
No. 3 Player Bulls
The back seat of the Bulls is also very large because of the oblique five holes, and the wiring method is also screw pressure, but the plug hole is round and relatively large. In the adjustment hole, there are screw fixed holes in the 4 corners. This large rear seat will encounter trouble when installation. If it is a non -chip box or a more thicker place in the installation, it will be difficult. Try not to choose this as much as possible The design of the big back seat
No. 4 player Siemens
Siemens’s back seat design also adopts the pressure plate and pressure line. This type of pressure line is actually eliminated. The main reason is that the line that can be inserted is too thin first, and it is not suitable for a slightly thicker line. The hard line is not suitable. The structure of the pressure plate is theoretically beautiful. In actual use, it is very easy to slip the line during the wiring.
The screw adjustment hole is one on the left and right sides. It is relatively small. There is no screw fixing hole. The entire rear seat is fixed on the base with screws. It is more convenient to disassemble
Fifth player Simon
The steel structure adopted by the bottom plate of Simon has a heavy feel, and it will be relatively flat on the wall. The rear seat is relatively large. It is only slightly smaller than the oblique five -hole bull. The two left and right adjustment screw holes, there is no hole in a fixed screw, the structure of the base and the bottom plate is also deducted. It is very difficult to disassemble.
Five -hole socket wiring method scores: Rogron, Simon 5 points, Schneider, Bulls 4 points, Siemens 3 points
The external structure and materials are almost analyzed, and the most important disassembly should be seen.
Comparison of metal parts after disassembly
Regardless of the product, after disassembly, the internal structure and materials are unobstructed. Let’s take a look at these five products. In addition to a good -looking appearance, can there be a high score inner inside. convoy
The switch part of the No. 1 player Rog Lang
The rails on the switch of the Rogger can be directly removed.
After disassembling it, you can clearly see the silver decorative bar at the far left of the switch, which is pretty good. The material is PC. On the white switch, it comes with the fashion style
The rear seat is deducted. The disassembly is relatively simple. After the disassembly is removed, the lever and flow parts of the copper alloy are exposed. The picture below can see the structure of the saddle terminal
This picture is complete. This is all metal parts in the entire switch. The saddle terminal and screws are made of alloy. The pole, the design of the knife adopted
Socket part
The panel and base are the buckle structure, which is easier to disassemble and design
The wiring method on the back is a saddle -type terminal. The rear seat is fixed with 4 screws. It is easy to disassemble
2 holes and 3 holes are equipped with protective doors
The disassembly of the load looks like copper, and the three screws are made of alloy.
The switch part of Schneider No. 2
Schneider’s panel is buckled on the base, and it also meets the custom needs of Schneider’s change of panel. It is easy. You can remove the lower board gently.
Between the base and the rear seat is the deduction structure, which is relatively easy to disassemble. The volume of the back seat of the switch is relatively small.
After the switch is disassembled, the pole that makes me more surprised. It is not copper. The screws and the flowing parts are riveted integrated. , All rivets have hidden dangers, so try not to choose such a design
Schneider’s socket part
Five holes in the frame buckle structure of the frame, the edge design
The disassembly of the socket is carried out from the front, and the back is integrated design
All the disassembly, the two protective doors, and the flowing parts are copper
The switch of the third player bull
The bull’s switch panel is deducted very tightly, and when it is opened, it is almost thought that it will be dismantled violently.
Unlike the form of the first two brands back seats, the rear seat disassembly of the Bulls is the same as Schneider. The front part is buckled and the back is integrated back seat. After removing the metal part Above
It is similar to Schneider’s structure. The three screws cannot be disassembled and integrated with the flow parts. It is quite ingredient. The size of the knife is comprehensive and small. It is too long, and a steel needle is also added to the spring to keep the hardness of the entire lever
Bull’s socket part
All -inclusive panel design
The back seat is integrated and disassembled from the front. The protection door of the five -hole is different from other brands. It is gray and the material is unclear.
The load and the screws are welded together. It is not recommended to choose such a structure
The switch part of Siemens No. 4
Siemens’s switch is taken away. The large plate on the surface is a flat tablet. I think this structure will affect the overall feel, that is, when the switch is touched by the hand, in fact , Just come into contact with a surface tablet film
The rear seat is translucent and looks like a PC material. The picture below is the cockle. After the rear seat is opened, the entire lever and the cockle are very greasy unknown objects. Add an additional lubricant
It’s also very thick lubricating oil on the mouth
It can be seen that the screws are used in alloy metal, and the flowing parts are copper. The flowing parts and the mouth of the mouth are full of lubricating oil on the spring and the corset.
This is also the only brand that uses the old spring+dial
Because Simon is not a true borderless frame, the border is composed of 4 parts, the left is the steel structure, and the others are all PC materials.
The rear seat of the buckle structure is okay, it is not very laborious. The screws are basically the same. They are all used in alloy materials. Other lips and flow parts are copper. The contact area of the knife is large enough. Well -designed
Four parts, panels are buckle structures, no edges, rear steel structure
There are protective doors of 2 holes and 3 holes, and the materials seem to be nylon 66
The current flowing parts are still very careful, there are engraving
Comparison of the metal parts of the switch
I disassembled the internal metal parts of the five brands together, so that it was convenient to compare from left to right, namely Rogron, Schneider, Bulls, Siemens and Simon
The screws of the five brands are the thickest of the Bulls. The design of the carrier with the design of the load, Schneider and the Bulls have welded loading flows on the screws, and there are hidden safety hazards
The load part of the five brands, because Schneider and the Bulls are welded with screws, so the screws are entered together. Siemens carried a lot of lubricants and dirty paper on the paper load.
The five brands of the mouth are the design of the old mouth, and the other four brands are the design of the new knife.
The design and materials score of the switching lever: Rogron, Simon 5 points, Schneider, Bulls 3 points, Siemens 2 points
Switching screws and flowing parts design scores: Rogron, Simon 5 points, Siemens 4 points, Schneider and Bull 3 points
The comparison part of the most important current and silver contacts
A good switch is naturally working hard on the materials of the load and silver contacts.
What is the data of this five brands?
The thickness of the copper sheet of the load is 1.1mm, the diameter of the silver contact is 3.15mm, the weight of the overall metal carrier is 2.3g
Schneider’s carrier’s copper sheet thickness is 0.69mm, and the silver contact diameter is 3.05mm, which is lower than Logland’s data.
The lower silver contacts are riveted directly with the screws, which is really enough. Once again, riveting can easily cause fire, huge safety risks, try not to choose
The thickness of the copper sheet is only 0.67mm, and the diameter of the silver contact 3.25mm, with screws weighing 13.4g
The only brand of old -fashioned coarse -board structure, specially take a look at the cockle
The thickness of the copper piece of the load is 1.16mm, the silver contact 3.25mm diameter, and the weighing weight of the flowing part is only 1.7g.
Design of knife design with Rog Logland, Schneider, Bulls
Simon’s carrier’s copper sheet thickness is only 0.85mm, the diameter of the silver contact is only 2.98mm, and the weight of the current is 2.2g
The thickness score of the switch loading flow: Rogron, Siemens 5 points, Simon 3 points, Schneider 2 points, the bull 1 point
Adjust the holes and other detail scores: Rog Lang 5 points, Schneider, Bulls 4 points, Simon and Siemens 3 points
No. 1 player Roglans
No. 2 player Schneider
No. 3 Player Bulls
No. 4 player Siemens
Fifth player Simon
Fifth player Simon
Socket part
Switching silver contact score: Siemens 5 points, Rogue, Bulls 4 points, Schneider 3 points, Simon 2 points
The weight of the switch loading flow to the weight: Schneider 5 points, Rogran, Simon 4 points, bulls 3 points, Siemens 2 points
Partial disassembly comparison
The protection door is a very important component. Only the 5 brands are the Bulls of 4 -hole protection door, and the other 4 brands are 5 -hole protection doors. Among them, Rog Loglans’ protection door is the most conscience. Schneider, it is no longer easier to be
Site protection door score: Rog Lang 5 points, Simon 4 points, Siemens, Schneider 3 points, bulls 2 points
In terms of loading, the bull is made of copper silver -plated material. The other four brands are all tin phosphorus and bronze. In terms of the material of the carrier, the copper of the bull can not see what copper material is, but the plating plated is plated, but plated plated Silver, it will also increase conductive performance
There is a patented design of the Lognton socket load.
The following is my real shot
Then I made a comparison of Simon and Roggon. Roger’s patented edge design, increased the conductive area, is quite obvious.
In terms of the thickness of the current, Rog Lang is 0.58mm and weighs 9g
Schneider is 0.57mm thick, weighs 8.8g
The Bulls’ brand is more interesting. He plated silver on the thickness, and then it was 0.68mm in the case of enhanced tendons. The weight also made some hands and feet. For reference, I row the bull to the second echelon, after all, the data has water
The thickness of Siemens load is 0.59mm, weighs 9.3g
Simon loading flow thickness 0.56mm, weighing 9.2g
Sets and flow parts thickness scores: Rog Lang, Siemens, Schneider 5 points, bulls and Simon 4 points
Socket loading components weight score: Siemens 5 points, Rogora, Bulls, Simon 4 points, Schneider 3 points
Burning test
I hope that each point of each point to enter this post is to click on the video below. There are amazing content. The video is not very long. Every one I edit is accelerated. One is 1-2 minutes. The combustion test is mainly based on the material. High -quality PCs, such as imported Bayer materials, can basically be extinguished after leaving the fire source, and the domestic PC can also be extinguished within 5s of the fire source 5s.
As for the material that adds a lot of water outlets or even PC materials, it may not go out or extinguish the national standard requirements, but everyone thinks that if it is really on fire, one minute is really enough to put many other things other things. All ignited. Essence So the material related to family security is very important for the material of the switch socket, I really recommend everyone to watch the video
The entire video (if you want to watch the video, you can go to the site to search for viewing) divided into three parts of the combustion test, namely the socket fixed frame, the rear seat part, and the protection door part
Burning Test General Review: Rog Lang 5 points, Schneider, Bull, Simon 4 points, Siemens 0 points
Thank you for seeing here, and thank you for not seeing the friends who were pulled here to see the summary. Pay attention to the measuring data and scoring data in the form. There is no time to see everything. It is also recommended to see the combustion test
The summary part must be seen
First of all, posted a form, the score was clear at a glance. The highest score was Rogren. I have also evaluated other products of Rog Logland before. Throwing behind, there are no shortage of bezel -free founders, Siemens, and Schneider, who has been in the past two years, I feel that in design and materials, Siemens may not be updated in the past two years, and all aspects seem a bit aging in all aspects. It, of course, the panel is not a PC material, without flame retardant, which is the least acceptable
It is still a bit disappointing, and the design is still good, but the materials are still more ingredients.
The shape of the bull, maybe I still can’t accept it, it is more conscience in terms of materials, but unfortunately the design is still worse
Specific evaluation parameters are recommended to see the evaluation, avoid being misled by my certain subjectivity
So this is the last, thank you for seeing this, I think it is useful, please like it and collect it, encourage me, thank you