There are many types of hydraulic glows on the market, but the general volume is huge and touching, and it is very inconvenient to carry. I accidentally saw the Smoge mini hydraulic gimbal CH10 and Manfu Mito Magisa. The manufacturer’s OEM products are basically the same, and they start with the Smoge.
The Smog Hydraulic Global CH10 is black, and the main body uses anode oxidation technology. It has the effect of anti -scratch and corrosion. The height of the gimbal is only 7cm. It looks petite with my mobile phone.
The net weight of the gimbal is only 279g, which is equivalent to the weight of half a bottle of standard mineral water, lightweight and portable. Official data shows that the load -bearing is 3kg, and the machines that are basically taken out can be used.
The top of the gimbal is Aka standard fast installation and fast unloading. The fast -loading board can adapt to the mainstream camera on the market and easy to remove.
There is also a circular air bubble level on the gimbal, but in actual use, it will be directly covered after the fast -loading board is installed, but now the camera comes with the horizontal instrument. It is not a problem to level this.
A hexagonal hand is placed under the magnetic suction board under the magnetic suction, which can adapt to the screws of the gimbal handle and the fast -loading board. Users who are accustomed to the left hand can also freely replace the handle installation direction. Unfortunately The fixed position still needs to be improved.
The handle holding is made of soft skin -friendly rubber material, which is comfortable and can play a role of non -slip.
The bottom is marked with scale, which is convenient for accurate positioning, and the horizontal lock knob can be fixed.
The fast -loading board can be fine -tuned, and a relatively stable balance can be obtained when using heavier equipment.
Genois supports-55 ° ~ 90 ° pitch adjustment, which is limited by volume. The damping of the gimbal is average, but the external force can still obtain a good shot.
The bottom can rotate at 360 ° panoramic view, and the rotation is smooth.
However, the position of the lock knob is leaning down. If it is not high on the sliding rail, the lock operation will be blocked by the platform, which is more uncomfortable.
After some experience, there are actually a lot of problems. The overall damping intensity is not enough and the damping cannot be adjusted. The handle angle cannot be changed. The horizontal instrument does not work. However, there are not many small -volume hydraulic lanes that can be selected in the market, and the price factor is also a point that needs to be considered. Overall, although the Smog Hydraulic Global CH10 has limited functions, it is small, and it is easy to carry outdoors and can meet our basic needs. It is still a good choice.