Parameters and production process of large hook-arm sanitation waste bins

1. One hook arm truck can be matched with 20-50 hook arm garbage bins for recycling garbage collection and transportation, which fully improves the utilization rate of the vehicle;

2. The capacity of the garbage bin is large, the capacity of the hook arm garbage bin is: 2-18 cubic meters, while the ordinary PVC garbage can can only hold 240L, which cannot meet the actual needs. When ordinary residential units are equipped with 2 PVC trash cans, garbage will still be piled up or scattered on the ground, and the use of hook-arm trash cans can solve this problem;

3. The hook arm garbage bin with lid sealing design can avoid the secondary environmental pollution problem of garbage in the collection and transportation process, and can also avoid rainwater ingress, odor dispersion, and breeding of various mosquitoes and other problems.

4. With garbage dumping function, the back door of the garbage bin is equipped with a locking mechanism, which can be manually opened and easily used to complete the garbage dumping work by using the garbage truck.

5. The number of garbage inlets can be set according to the volume of the garbage bin: one pair of openings or two pairs of openings.

6. The support of the trash can cover can be ordinary iron, pneumatic support rod, spring support, or in the form of folding door.

7. Install oil-resistant, corrosion-resistant and age-resistant sealing strips at the back door of the hook arm trash bin to ensure no dripping during garbage collection and transportation.

8. The bottom of the box is equipped with rollers and pillars, thereby reducing the contact between the bottom plate and the ground and effectively preventing the box from rusting.

9. The box body is treated with anti-corrosion passivation, sprayed with anti-rust primer, intermediate paint and top coat, effectively isolating the air to prevent rust.

3 cubic bins

4 cubic bins

6 cubic bins

Stainless steel 3.5 square bin

3 cubic hook arm dumpster parameters

1. Garbage bin size: (length×width× height mm): 2000x1500x1000mm, box effective volume: 3m3, hook height mm: 1000,

2. The main material of the box body is made of Q235 high-quality carbon steel, national standard. The thickness of the bottom plate of the box body is: 3mm, and the thickness of the side plate of the box body is: 2mm. The feeding window opens with a clamshell type.

3. One feeding port is set on both sides of the box, and the feeding cover is also set separately, and the setting of the feeding port can meet the utilization rate of the box volume to the greatest extent and reduce the work intensity of sanitation workers;

4. The main anti-corrosion and anti-rust process of the box: the box body adopts professional anti-rust treatment, spraying anti-rust paint, overall phosphating and electrophoresis treatment, no obvious rust marks within three years, and the two sides of the box body are sprayed with slogans according to the requirements of the use unit.

Free spray painting

Hook-arm type trash bin making process

Cabinet body, material is divided into carbon steel (Q235) and stainless steel (304/1Cr18Ni9Ti)

The thickness is divided into various specifications such as 1.5mm, 2mm, and 3mm

Blanking process: laser, tower punching, flame, plasma, coil forming and CNC bending technology

Welding process: argon arc welding and gas welding spot welding or broken welding.

Rust removal process: the whole box body is deoiled and destained, and the surface rust removal is treated with sandblasting to enhance the surface adhesion of the paint.

Coating process: the inner wall is made of wear-resistant and corrosion-resistant epoxy resin asphalt paint, 793 sealant is applied between the two welds, and the outer wall is sprayed with acrylic two-component primer and topcoat, and the thickness of the paint film is not less than 60-90μm.