Various models of batteries are often used in life. In order to facilitate use, I generally choose to recharge the battery. Many charging batteries with strong performance and high performance will indeed be several times more expensive than ordinary batteries, but as long as it is matched with a reliable charger Use, it has been used for a few years. I have used several XTAR chargers before, and it has a good model for charging lithium battery and nickel -metal hydride battery.
Last week, I saw XTAR out a very compatible four -slot charger with a model of VC4SL. I just arrived in the first two days. I tried some of the batteries in my hand. The identification is accurate and compatible is also very strong. It can support common models of lithium batteries, and 1.2V nickel -metal hydride/nickel -cadmium No. 5 and 7 batteries.
As a battery and charger manufacturer with strong technical strength, XTAR’s packaging design is very industrial. The charger XTAR VC4SL is no exception. In the packaging The box is used. This charger supports QC 3.0 charging. It can be used with common 18W chargers. Many charging treasures can also be supported. Outdoor can also be used normally.
As a four -slot charger, because it can be compatible with large lithium batteries with 32650, its size looks not small, with screens on it, which can achieve the iconic capacity testing of XTAR, 0V activation and other functions. For professional players, these functions are particularly useful, and ordinary players can also use them to better manage the battery in their hands.
In daily use, we do n’t need to set up too much, directly install the battery, and then power the charger. There is no complicated place. VC4SL can intelligently identify the battery type, match the required voltage current, choose the best charging charging Strategy. In addition to the marked charging mode, VC4SL also supports capacity and storage functions.
For new and old batteries with unknown performance, the actual power of the battery can be detected by the capacity mode. In this mode, VC4SL will record the current with three steps of charging, discharge, and charging. Whether it is deficient or testing battery life.
If it is an unused battery, in the storage mode, the battery is safely charged and discharged by the VC4SL to keep the battery in the rated voltage, thereby improving the stability of the battery limit, avoiding excessive air consumption of the electricity, protecting the service life of the battery Essence
When placing the battery, you will find that the negative metal sheets used in VC4SL are very flexible. It can firmly fix the battery with different lengths and diameter. It is easy to get it when it is removed. Of course It is best to operate with both hands when loading and unloading the battery.
On the back of the VC4SL, there is a larger heat dissipation design. At the same time, you can also find the specific model of the VC4SL compatible battery. In addition, you can see that only the charger supports the QC 3.0 charging protocol, and supports 18W charging. This is for a battery for a battery The charger is fast.
There are also one -to -one corresponding indicators on the VC4SL battery groove. The charging is red and the charging is green. If the battery does not recognize problems such as it cannot be recognized, you can see specific information on the screen.
On the screen of the VC4SL, the battery’s power, voltage and other data are displayed through the form of the dashboard, and each dial corresponds to a battery slot. Each battery slot of the charger is independent. When only one is used, it can obtain a charging current up to 3000mAh. The two batteries can charging up to 2000mAh.
Through the keys on the left side of the screen, we can also switch the displayed data, including the CAP capacity, CUR current, IP internal resistance, etc. Through the button on the right, we can press and hold the charging, tolerance and storage mode. It is very simple to use. In addition, the type of battery, full charging, charging error, can also be seen on the screen, very intuitive.
In general, as a battery charger, the XTAR VC4SL not only works well, but also has a very comprehensive function. It allows us to easily charge various batteries, or identify the authenticity of the battery. The big screen above can view the status of the battery in real time during the charging process. It is simple and intuitive. If you are still at a loss for the battery full of drawers, try the multi -faceted player in this battery charging industry.