Recommended drawings of one -shoulder dress skirt
To shape the style of this dress, use the basic dress pattern (increase the loosening amount from 0 to 1.5 cm) and single -seam dressing pattern.
Note: When the loosening of the parts increases, it is recommended to use the material to sew clothes with the added fiber.
The length of the waist dress is about 70 cm. In order to simulate the pattern, the back films, front and sleeve slices of drawing are re -depicted.
From the neckline in front, place the middle of the front down 4 cm. Draw a horizontal line on the left (get point B at the point of the sleeve wire). Starting from point B, place 0.5 cm up and draw a slightly round front neckline. Measure the AB paragraph on the sleeve and transfer it to the back. Draw a horizontal line on point B (back). Starting from point B, 0.5 cm is placed upwards, and the smooth lines of the neck are drawn (Figure 1).
Tighten the back and side seam of 1.5 cm.
Cover the sleeve pattern in the front of the clothes, and move the vertex of the sleeve 1 cm up from point A (thereby reducing the coordination of the sleeves along the upper part of the sleeve). Draw a horizontal line through 0.5 points (front sleeve hole) (red dotted line). Cut off the top of Okat and continue to shape the sleeve.
The width of the bottom sleeve is about 50-55 cm, but you can increase or reduce it according to your own size. Cut the sleeve vertically into half and separate the components along the upper edge. Fill the bottom edge with a smooth circular line.
Increase the balance of a comprehensive stitching of 3 cm wide on the upper edge of the sleeve. When sewing the dress, the loose band is twisted into the band formed by the stitching. The width of the sleeve at the bottom is bent and sutured, the loose band is inserted into the loose band, and the sleeve is fixed on the forearm. Therefore, the length of the sleeve is shortened and the volume is generated along the bottom.
In addition, re -trim 3 cm wide decoration from the rear and front.
For clothing production, any clothing with elastic fiber is suitable. To sew this model, you need: about 2.0 meters of dress fabrics, 145 cm wide, hidden zipper, about 1.0 meters pine tight, 2.5 cm wide, sewing thread.
Fashion stitching horn bullet skirt drawing reference
Source | https://korfiati.ru/2019/06/kak-dzhinsovu- yubku/
Today, we will provide you with a very cute horn denim skirt. This skirt comes from two female brands in the world, which can perfectly integrate into any wardrobe, and even become a great substitute for jeans. With this skirt with you, you will feel its comfort.
The structure of the denim skirt
This model has a skirt and waist. The length of the side seam on the side of the skirt is 70 cm, the contour is free, and there is no fastener;
To draw a skirt version, first you need to measure:
Waist circumference (OT) 68 cm
Hip around (on) 94 cm
Hip height (WB) 20 cm
Skirt length (CI) 70 cm
Draw a rectangular нн1矩1:
AA1 = 1/4 from + 5 cm
Ab = measured hip height. Draw a horizontal line B1B2 = ¼OB+ 5 cm.
Side sewing skirt. Connect the point A and point H2 in a straight line segment with ah2 = A1H1 in length. Draw the side stitching, as shown in Figure 2. 1. Connect point AC-D-B1-H2.
Draw the bottom line н1н2 smoothly on the pattern. From the point H1 and H2, leave H1M1 = H2M2 = 16 cm (the width of the suture part) and draw the cut line. Cut the pattern into two parts and cut them separately.
The position of the loose band. AC = 2.5cm, CD = 3.5cm. Leave 4.5 cm from the center line to the left to draw a loose band.
Draw an front placket similar to pants on the skirt. The width is 3.5 cm and the length is 16 cm.
Sign on the position of the pocket on the front film of the skirt.
In addition, cut out the loose band -a 3.5 cm wide rectangle and a length measured from the pattern.
The balance must be added to all seams, except for the top and bottom of the skirt, the seams between the details of the skirt and the sewing details at the bottom are white.
In order to cut the skirt you need: 0.7 meters of blue denim cloth width of 145 cm, 0.5 meters of white denim cloth width of 145 cm.
Reference of “Weight, Letter 97585 1096” of Drinking Folding Dress Reference
Source | https://korfiati.ru/2012/05/vyikroyka-s-kachelkami//
The length of the waist is about 50 cm. On the pattern in front of the dress, cut the chest province on one side. Draw a horizontal line in the middle of the front of the clothes. Cut along this line.
Close the chest province and align on one side. From the high point of the chest, draw a horizontal line in the middle, and place 1-2 cm along the left line (the longer the distance, the deeper the neckline of the clothes). The shoulder is placed with a rash of 3 cm and connected through the pattern.
In addition, leave the middle position of 6 cm in front of the front, draw a horizontal line -a piece of decorative facing towards the top of the skirt.
In order to simulate the sleeve hole of the dress, the length of the shoulder was shortened from the pole point by 3 cm and deepened 1.5 cm (see Figure 1).
In order to simulate the curtains on the edge, cut the pattern directly and below the waist and move it for 10 cm. Draw a smooth line on the front side.
In order to simulate the hangingness of the back edge, the cut pattern above and below the waist and below are 10 cm. Draw the smooth lines on the side of the back.
Welcome to the circle of friends