Furniture and electrical appliances are often placed in the wall in daily life, but the plugs on the wall are not easy to approach, which is very annoying. Bulls have launched a small plug that can turn 90 degrees: “single -phase bipolar disassembly plug”, which can be used to use it to facilitate furniture and appliances, and the narrow space is more flexible. Xiaobian got the engineering version of the plug first, and immediately gave everyone the evaluation experience of this product.
At first glance, I feel that there is a big difference between the Bull 90 -degree plug and other wire disassembly plug products. In terms of texture, the bull 90 -degree plug workmanship is delicate and clear.
Bulls 90 degrees plug are made of white PC material. You can see screws in the screw holes that are compatible with common cross or word -free screw knives, which can be easy to disassemble.
On the surface of the shell, you can see the “Bull Bull” logo trademark. In addition, it is designed in the screw hole to improve the handy and convenient hand.
You can see that the 90 -degree plug is composed of two structures, and the hexagonal screw cap is fixed in it. Even after the screw is removed, the screw cap will not fall out. Don’t worry about the loss. In addition, the engineering machine on the editor did not make information. The mass production version will have 3C certification, qualification certificate, SN number, production date and so on.
The plug-in foot is marked with 10A 250V words, the maximum support of 2500W power is used, and the product model is printed below: GNT-10L6.
In addition to improving the feel of the top screw position, four raised patterns on both sides are also used to improve the feel.
Directly insert the state.
45 degrees bending.
90 degrees bending.
The editor made a GIF of the Bulls 90 -degree bend plug, which can intuitively see the specific turn. Supporting up to 5,000 rotations can still be used normally.
The screwdriver is removed to see how the workmanship is. Xiaobian uses a common cross screw knife. Of course, the word screwdriver is also supported.
Remove the screw.
Separate shell A and B.
List of separation: From left to right are the shell screws, shell A surface, and shell B -side+components.
Remove the rotating structure in the shell.
The shell A and B are very thick. The thickness of the top bottom is 1.8mm+, and the thickness of the side wall is 2.3mm+. It can also be used in harsh environment to withstand multiple falls and trample on the human body without damage.
The product model can be seen at the bottom of the shell B face: GNT-10L6-02 1-8> PC
Two screws are fixed with the thread plate, with a wiring specification of 1.0mm² or 1.5mm², and support the cable outer diameter up to 8.8mm.
List of disassembly: rotating parts, shell B side, and shell A side.
Finally, look at the details of the rotating part.
The hole is a cross/one -word screw, which is used to fix the tight wire core.
The rotating protection design of the wire insertion is facing the incoming port when the 90 -degree turn.
Continue to separate rotating parts.
List of separation of rotation components: rear cover isolation plate, bipolar pins, component warehouse.
Both pins and screws are made of copper, with no magnetic suction reactions. The resistance value is low, and the large current has strong capacity.
The screw thread is wide and easy to lock.
All components list.
Next, let’s practice it to see how to assemble the Bulls 90 degrees plug.
First use the screwdriver to remove the case, and the cross word is okay.
After the shell is separated, 2 wiring screws of the loosening parts and 2 puzzle screws are loosened.
Use tools or tiger clamps to peel the cables and reserve about 5mm.
In the wiring column of the rotating part, pay attention to all enter.
Tighten the wiring column, and the other wire is handled in the same way.
Sort the two wires and put them in the pores of the thread.
Tighten the thread plate, and fix the wires to avoid pulling out of the loose.
Cover the housing, pay attention to the flocking buckle.
Tighten the shell screws and make great achievements.
In the case of extension of the plug -in board, the elbow force is more scientific, and it will not be easily pulled off.
Of course, the direct insertion mode can be used.
After rotating 90 degrees, it is lower than other peripheral items.
When the Bull 90 -degree turning plug is used, the height is only 20mm. Compared with the traditional direct plug plug, the reserved distance of 60mm is more dexterous in the narrow space.
When encountering the need to get electricity on the wall, the Bulls’ 90 -degree turn plug is only a height of 20mm. Compared with the traditional direct plug plug, the advantage is still obvious.
Summary of charging head network:
Small design shows large uses. Although the Bulls 90 -degree turn plugs are small, the clever design can make the living space more comfortable. Especially for friends with furniture and appliances at home, this product is worth recommending. Make the furniture as much as possible to solve the trouble.