What is the wooden skin?
Wooden, (commonly known as: wooden leather, single board; English: VENEER) and its veneer decoration industry started in the 1950s. According to the editor of Wuxi Decoration Company, in the past ten years, my country’s furniture manufacturing and decoration and decoration have been used in large quantities of thin wood. Monopoly craftsmanship produces wooden skin. Today, I will introduce the knowledge about wooden skin purchase and construction technology in detail. Let’s understand it together.
Woodpiece purchase skills
(1) Selection level
According to national standards, wooden skin is divided into primary and secondary. Usually important surfaces should be selected, and secondary wooden skin can be selected for the secondary surface. The selected wooden skin should not have defects such as death, decaying, and white edges. The important aspects of some components are not allowed to be excessive in mineral lines.
(2) Select texture
The texture of the wooden skin is divided into straight lines (straight lines) and mountain patterns (in the shape of a mountain). Select the texture of the wooden skin according to the product requirements. The texture of a group of products should be basically the same.
(3) Select color
The color of the same tree has a deep shades, and the color model (that is, the paint wood skin color plate) according to the production sheet product. Choose the right wooden skin to paint.
(4) Selection specifications
Select the right length and width. Considering the minimum balance, the specific operation is as follows: length: According to the specifications of the product component, first choose the wooden skin of the long specifications, and then select the short specifications of the wooden skin to make the remaining material less than 150mm or greater than 450mm; the width is stitched according to the required size. Essence Common thickness is 0.15 to 0.6mm.
What glue does it use
Universal glue sticker wooden skin
Place glue on both sides and place it for about 5 minutes (fixed according to temperature and humidity). When touching the slightly touching hand with your hands, use the wooden tool to press it by hand. Because universal glue is a kind of compressed glue, the more realistic the pressure, the better its effect.
It does not need to be heated during use, and it is easy to operate.
1. Infinitive solvent, paint is easy to foam;
2. Organic solvent type, not environmentally friendly;
3. When the wooden skin is large, it is easy to crack;
4. Poor weather resistance, when climate change is large, there is a cracking or dehydration.
Paste the wooden skin with ordinary white latex
Generally apply glue single -sided, wet wet wooden skin, improve the softness of the wooden skin, and then put the wooden skin on the wooden material, pressurize and compact it, and dry it.
1. Environmental protection;
2. The solvent resistance is better than the universal glue, and the paint is generally not foam.
1. The degree of proficiency in workers is higher;
2. Low efficiency.
Sticker process requirements and operating standards
1. When paste 0.6-1.0mm wood slice, the rubber is performed by 100 ~ 130g/㎡ when coating. When the single-board thin slice is thicker, the high amount of cloth is applied, and it is most appropriate when there is only a little seepage. When the glue is too small, it is easy to owe glue and cause dry glue to remove the gum; many glue is too much to cause the pollution surface of the osmotic glue, which is not easy to achieve a good coating effect.
2. Preparation time: 25 ° C to complete the pressure within 10 minutes.
3. Hot pressure temperature: 105 ~ 110 ° C for multi -segment heat compressor, 120 ~ 125 ° C for single -layer fast heat compressors
4. Hot pressure time: When the wood thin slices are 0.8mm thick, the multi -segment heat compressor is 3 points to 4.5 points, the wood thin slices are 0.65mm thick, the multi -segment heat compressor is 3 points to 4 points, 4 points to 4 points
6. In winter, please increase the temperature by 50C and extend the heating time for 10 ~ 30 seconds; immediately stripped the test after decompression, and there is a wood breaking to determine that the glue agent is complete. Multi -oil wood thin slices such as pine must reduce temperature to 90 ~ 100 ° C. Because the thickness of pine is 1 ~ 1.2mm is thicker and the hot pressure temperature is low, the heat pressure time needs to be prolonged.
7. Wood water content (before thermal pressure): OAK, ASH is the most suitable for 6 ~ 10%, Cherry and PECAN, walnut wood, sphere, etc. are 6 ~ 8%, and the moisture content of fiber boards and plastic panels is 6 ~ 8 to 8 %Is the best. High moisture content or lower than the standard often leads to poor glue, which causes Checking. In particular, when the winter glue condition is out of control and the product sales are sold to the United States with relatively low humidity, the most prone to glue failure, surface cracking, and customer claims are most likely. Therefore, it is necessary to pay special attention to all glue conditions to meet the control standards to successfully complete the glue operation.
8. The thickness of the thickness of the wood slice is within 0.1mm, and the thickness of the thickness plane of PB and FB plate sand needs to be within 0.15mm, and the adverse rate of the above standards will increase significantly. Avoid overlapping rubber paper, up to 2 layers, 3 layers of adhesive paper will increase the water in VENEER too high, and too thick can also cause too much pressure and insufficient heat transmission. Or the main reason for floating.
9. Due to various adhesive conditions such as room temperature; relative humidity; tree species; sandy light flatness; thin and thin slice; thickness and water of rubber paper; granular boards; fiber board specifications; or not tide, air conditioning, dehumidification equipment; cloth gel machine; Whether there are frozen circulation devices and gelatin machines; the amount of cloth glue, whether or not one, whether too much or partial or local gum; workers’ proficiency; difference in water content; pressure time, pressure, and so on. It is necessary to try to meet the standard operating conditions, and even the types of coating and the coating method affect the collision results of the wood -thin pieces of spelling. It is generally learned from the experience of glue failure that most of the adequate adequate is mostly controlled by glue conditional control, not the quality of the collagen itself, so be sure to control it under the best glue engineering conditions. Ensure the quality of processing.
Is the surface of the furniture or the method of stickers or stickers
No matter how simulated the printing paper, it is impossible to truly reflect the natural texture of the wood. The texture of the wood grain surface of the printing paper is perfectly flawless, and even the color difference is not. It is also impossible to have natural tattoos of wood.
Therefore, if you see the surface of the furniture is open, you can see the natural pattern of the wood, or the texture cannot be found. The large area of texture has stitching traces, which is wooden skin; Find the same texture on the same product, the surface is flat, and there is no pattern, which is printing paper.
In addition to the large area of wooden skin, we will also use wooden leather to seal the edge strip during decoration. Let’s learn with the editor of Wuxi Decoration Company below.
What is wooden leather sealing edge
The color and texture of the wooden sealing edges are naturally transitioned naturally to ensure that the wooden skin is divided into neatly. After the surface sand is light, it is flat and smooth, which is convenient for customers. The width of the border seal is 8mm to 300mm. The standard length of each volume is 200 meters. It can be customized according to customer requirements. There are diverse varieties, including the waterscape willow wrapped edges, teak wood leather sealing strips, cherry wood leather sealing strips, black walnut leather sealing strips, red oak leather sealing strips, golden silk teak leather sealing strips, maple wood leather seal sealing The edges, Sali Woodskin seal border bar and other domestic and imported trees.
The wooden sealing edges can be used on the doors and windows, and the door sleeve, window sleeve made of covering wooden leather on the density board, which has the beauty of solid wood, greatly reduces the waste of solid wood and saves costs; The use of wooden lines made with wooden skin and skirting lines, successfully solved the problem of the supporting connection of furniture wooden skin, wooden door wooden skin, floor wooden skin in the decoration.
The emergence of solid wood leather sealing strips is the icing on the cake of plate -type furniture that uses furniture and wooden skin. The perfect combination of edges and noodles is naturally integrated, which makes the furniture clever and closer to the beauty of nature; Making the handrail and photo frame is no longer satisfied with use, it is also a kind of beauty, pursuing higher quality taste.
Maintenance method of wooden sealing edges
1. Put it lightly. Many people often drag them directly on the ground in order to save effort. As everyone knows, this kind of friction will greatly damage the sealing of the wooden leather and affect its service life. Many people have consensus on this, but it is still difficult to avoid.
2. Sun protection moisture. The wooden sealing edges will cause a certain degree of deformation and damage when encountering abnormal weather such as high temperature and rain. Therefore, try to avoid highlighting highlights in life, and to achieve the effect of moisture -proof on the table’s foot pads.
3. Clean and anti -scalding. Do not use irritating liquid to scrub the wooden leather edge strips with irritating liquids during daily cleaning work, and do not place hot liquids such as boiling water directly on the furniture to avoid causing the paint from the edge strip.
The above is the Xiaobian of Wuxi Decoration Company to share the knowledge about wooden skin. Do friends who are going to decorate do you know? More decoration knowledge and cases are all installed in Wuxi!