Several aspects that cannot be ignored when customized cabinets
Let’s talk about the cabinet today.
When it comes to cabinets, everyone may say that my cabinet is solid wood. My cabinet is quartz stone. My cabinet hardware is used by Belong …, it is like a cabinet like a cabinet. The expert.
Of course, the materials used in the cabinet, the selection of hardware accessories, etc. It really plays a decisive role in the quality of the cabinet, but it is undeniable that the following aspects I mentioned have a considerable impact on the quality of the cabinet.
1. Independent cabinet:
What is “independent cabinet”? Everyone knows that we usually do the kitchen operations on the lower cabinet, so the lower cabinet needs to bear a certain amount of strength, such as chopping bones, cutting meat, etc., it is better to support the lower cabinet. There are five faces of upper, lower, left, right, and rear, all of which have their own independent cabinets
(Do not share a cabinet with near the cabinet), with a separate cabinet supported by 4 corners at the bottom. This is the “independent cabinet”.
Two cabinets nearby, or sharing a cabinet, or the bottom of the bottom, there are no exclusive angles (two or three cabinets and one set of corners) at the bottom. These are non -independent cabinets.
2. Anti -cockroaches with silent edge
The use of the cabinet with a mute edge of cockroaches will be relieved when closing the cabinet door, and it can also effectively prevent the entry of insects such as cockroaches. If the hinge with damping, the entire door panel will be closed and the feel will be very good.
3. Backboard (single -sided seal/double -sided seal)
In the process of making cabinets, some manufacturers cut corners and reduce materials to make single -side seals on the back plate.
The single -sided backplane is poorly moisture -proof, easy to humid and mold, and has formaldehyde release, which can easily cause pollution. Therefore, pay attention to distinguishing the single/double -sided seal process of the back plate.
4. Splicing method:
Some small manufacturers or woodworking cabinets hand -made on -site are connected only with screw rivets or adhesives. The regular manufacturer will use the box structure of the box to add fixed and fast -packed parts to install and stitch the cabinet. This can ensure the firmness and tolerance of the box, and use less glue and more environmentally friendly.
5. Aluminum foil on the surface of the sink cabinet board
For the lower cabinet with a sink, aluminum foil is required. This mainly depends on whether the aluminum foil is pressed on the surface of the cabinet or the on -site paste on the surface of the board (there is a board on the market with a panel with an available aluminum foil). The sealing performance of one -time suppression is better, the moisture is not easy to penetrate, it can protect the cabinet more effectively, and extend the service life of the cabinet.
6. The whole board is added with aluminum strips
The whole counter is generally under the countertop. There will be a whole plate under the table. There will be three aluminum alloy bars on this board.
Installation process can effectively fix the sideboard of the cabinet, so that each independent floor cabinet becomes a whole without shaking and tilting; secondly, even when it is chopped and cut on the table On the plate material, reduce the local stress of the table’s strength point, stable and extend the service life of the table.
7. Fixed codes on the cabinet
Most of the traditional cabinets use ordinary codes. The number of ordinary codes is small, and most of them do not have a safe lock structure. They simply fix the entire hanging cabinet through screws and buckles. The solidity is slightly lacking.
The new three -point invisible codes, through six fixed positions, increase the loadability and firmness of the cabinet, and adopt a security lock structure, which looks beautiful and firm.
8. Provide test report
The cabinet also belongs to furniture products. According to the state’s explicit regulations, the finished product test report should be issued and explicitly showed the formaldehyde content. Some manufacturers can only provide raw material test inspection reports, but the environmental protection of raw materials does not mean that the finished product is environmentally friendly.
Therefore, the merchant must provide the finished product test report. You can also record the number of quality inspection reports presented by the merchant to the official website of the quality inspection department to check the authenticity.
The above aspects of the cabinets are aspects that can be paid attention to when you are scheduled. In fact, the quality of the entire cabinet also has a considerable impact. As the saying goes, the details determine success or failure. It will be praised.
Product Recommendation: high quality cabinet lock