Hello cuties! Welcome to Xiao Y and Little Green’s creative workshop, I am a brain-opening craftsman Lover Xiao Y. I used to do a lot of complicated and bulky hair accessories, but I always felt that something was missing. As a lover of exquisite craftsmanship, only large hair accessories can do. Today, Xiao Y will make two small hair accessories, which can usually be used with some other accessories to complement each other. Amateur craftsmanship, just for fun, let’s take a look!
1. Let’s take a look at the finished product first! The pink bunny model and pink hairpins are even more compatible! Maybe the little bunny is too petite to set off the mini hair accessories so large. But look at the shape can be regarded as smart and cute! Let’s take a look at the production process!
2. Some red materials are still selected today. Little Y decided to make a pair of pink hair accessories, accessories such as pink ribbons, red ribbons and thinner pink ribbons. Because the hair accessories to be made are small, the width of the material is not large, and the texture is relatively light. When the cuties make their own, you can also pay attention to these problems.
2. After reading the software, look at the hardware. Today’s hardware is relatively simple, a pair of small press-clamps, a pair of flower trays, a pair of pendants, a pair of beads, a pair of metal rings. Believe in Xiao Y, simplicity is never simple!
3. Start processing now! Start by cutting the ribbon into four segments. Two of the paragraphs should be slightly longer, and the other two can be slightly shorter, so that they will be more layered when stacked together. After the ribbon is cut, you can use a lighter to burn the edges a little, haha, rest assured today, as long as it does not burn for too long, it will not burn quickly.
4. Now take out the needle and thread, fold the four ribbons in half and sew them from the middle with thread to form four cylinders of different sizes. Before proceeding to the next step, the cylinders can be pressed slightly to flatten them from the middle.
5. Plug in the glue gun and warm up for a while. After the glue stick melts, take out the cylinder you just sewn, spread the larger one underneath, apply a little glue, and glue the small cylinder to the top. When carrying out this step of operation, you must be careful not to burn your hands, and try not to apply too much on the edges when applying glue, otherwise it will overflow when squeezing, which not only affects the senses but also easily sticks everywhere.
6. Now start processing the pendant part. The needle-nose pliers open the metal ring, penetrate the pendant, and gently clamp to close the opening. Remove the fine gauze tape, cut two segments of the same length, burn it slightly with a lighter to remove burrs at the edges. The fine yarn tape is threaded into the metal ring and glued to the middle of the ribbon with hot melt adhesive.
7. Now take out the thicker tape, also cut it to the same length, burn the burrs with a lighter, and glue it to the middle of the ribbon with hot melt adhesive. Here it should be noted that the length of the ribbon should not be too long, not exceeding the length of the ribbon below. Take out the tray, glue it in the middle of the roving tape, and glue the red beads in the middle of the tray, and the main body of the hair ornament is complete. Now remove the clamp and glue it to the bottom of the hair accessory. It’s done!
8. How about it, this mini version of the vintage hair accessory is cute! But accidentally red with green! If you are interested, please try it!
Creative craftsmanship, welcome to poke here! If the little cuties have any magical brain holes or ideas, you can also leave a message to tell Little Y. Here are Little Y and Little Green, two maverick artists! Welcome to like, collect, follow and forward a wave, your support and love is the driving force for our continuous struggle!