Author of this article: Uncle Jiang
I. Introduction
TV can be said to be the most commonly used home appliances in the home. Although the TV is now affected by the projector, most families still retain the location of watching TV. After all, the living room that lacks the TV always feels like a little less. what.
So I want to try to install TV brackets by myself. On the one hand, I can save money, and on the other hand, I also exercise their personal skills. Of course, this TV bracket is not casual. The reason why TV bracket installation is expensive, and there must be some difficulty, and then I will share the experience I summarized with you.
Before talking about installation, let’s talk about the stubborn tube of the TV wall.
TIPS: Small common sense on TV wall embedded pipes
In the water and electricity renovation article I wrote before, I have introduced less introduction to the TV wall embedded pipe, and in detail here.
1. Why should I be embedded?
Cover the ugly.
The ugly here refers to the HDMI cable, power cord, network cable connecting the TV. By embedding the tube in advance, these lines can be allowed to go without directly exposed.
2. How much caliber and how to determine the embedded position.
50pvc tube is enough
, Too thin or not, it is too rough to increase costs.
As for how to determine the embedded position, the two ends of the embedded tube can be within the projection range of the TV and the projection range of the TV cabinet, respectively, and given priority to the position near the middle line. Look directly at the picture ↓↓↓
The yellow line in the figure is the coverage of the TV. The black in the middle is the embedded tube. The top of the embedded pipe is only in the yellow area. Try to consider the power socket and smart box at the bottom. However, it is also necessary to consider whether the position of the stent punching in the later period will be affected, and it will not be mentioned here.
Types of TV frames
Let’s continue to talk about the type of TV rack. Now that we have lived well, people have learned to enjoy. The previous TVs were fixed on the wall, and now they can be flexibly changed. The most common ones are mobile and fixed.
1. Mobile
Through a series of mechanical structures, it can realize changes in the front, up and down, and tilt of the TV. The flexible changes in the bracket increased the visibility of TV.
A friend of me just pretended to be on the balcony, watching TV by the balcony, it was cool!
2. Fixed formula
As the name suggests, it is directly fixed on the wall. It can only be seen in front of the TV, which can be adjusted to the tilt angle.
This bracket has strong stability and higher security than mobile, but the flexibility is almost.
3. Others
Other shapes are suitable for some special scenes, such as conference rooms, and do not discuss here.
Summarize:
In fact, the two are not absolutely good or bad. The mobile type also meets the needs of some consumers. For example, I may not be used but I am worried about it in the future, so I bought a mobile TV bracket.
In order to ensure that I did not regret it in the future, I still chose a mobile TV rack. Taking advantage of Double Eleven to buy a wave, for choosing a brand, I finally selected Lege TV brackets based on sales and evaluation.
Le Ge (48-70-inch) TV Hanging Rotating Television Rotating Expansion Wall-Main Television Ring TV Rock 60/65-inch Xiaomi Vitality Sharp TCL Hisense and other universal L7229 yuan
Jingdong
Third, the out of the box
1. The packaging is indicated that the size is 48-70 inches, and there is no problem with the mainstream TV brands.
2. Packaging: TV bracket main body, two wall hanging walls, installation accessories and instructions.
3. The overall texture is still good. I like this scrub black very much.
Fixed screw: Finally, fix it with a wrench.
Pay attention to the scope of application when buying, and the applicable TV size range will be indicated in the product description.
For the installation interface, it is now a standard interface, so there is no need to worry about the situation that cannot be installed. (But there are still unexpected situations, let’s talk about it below.)
About charging:
Some TV manufacturers will give out installation, but some are extra charges, generally ranging from 100-200 yuan. I think this price is normal, but a friend of me spent 300 yuan for installation, it was really pitted!
Enter the actual installation link.
Fourth, TV bracket installation
In fact, the most important thing for the installation of TV racks is the positioning, and punching is the same as ordinary installation projects.
How to position it?
Personal summary: Find the center → fixed height → punching positioning (looking for flat)
Divide according to the installation process
Tool preparation, fixed -point setting high, fixed punching, TV installation
Four links, talk about the place you need to pay attention to.
1. Tool preparation
Impact diamond, horizontal meter, wrench, cross screw knife, pencil, tape measure
① Institutional drill: The installation of the TV rack needs to be punching the expansion screw, so the impact drill must be indispensable. If you can hit the concrete wall, don’t use the wrong tool. Ordinary electric drills are not possible.
② Horizontal meter: Determine whether the TV installation is flat, and it will be troublesome if you install it. You do n’t need that kind of professional level here. In fact, the simple level of small heads can be used. As long as you determine one point, you can determine another point through the horizontal meter. Two points to determine the line, and the other points are good.
There is a horizontal instrument in the package, so you don’t need to buy it.
2. Install the TV wall
This is very simple. The order of the installation accessories in the instructions is available. Now the accessories have been numbered, and it can be operated directly according to the instructions.
The two holes above the wall hanging wall are smooth, but the two holes at the bottom are slightly shallow, which will not be fixed. Finally, I thought a way, temporarily found a cushion, and drilled a hole. Essence
Finally, just fix it.
3. Fixed -point fixing high looking
Let’s talk about the fixed point first: It is to find the center point of the bracket installation. This can be determined according to the TV wall. I can determine it according to the TV cabinet. I was determined based on the TV cabinet, because if these two were not centralized, I could not accept it.
After finding the center position, use a pencil standard.
Ding Gao is slightly troublesome. So how to determine the height of the TV? Say while looking at the picture ~
The height we must determine now is the height of the punch position and the ground. (I use the ground as a reference, and the TV cabinet is also available.)
In other words, we must first determine the height of the TV cabinet H3, the height H2 at the bottom of the cabinet and the TV, the height H1 at the bottom of the TV and the bottom of the TV.
Among them, H3 and H1 are fixed, and H2 needs to be determined according to individual use habits.
Tips: So how is the H2 height determined?
I think so. First of all, I will not put too high on the TV cabinet, otherwise I will block the TV and affect the sight. At most, some decorations will be placed, or the game consoles and smart sounds will be found. Find the highest item. Determine the height, I finally told me
25cm.
After determining these two data, the next data needs to be calculated, that is, the installation hole of the TV rack is from H1 at the bottom of the TV, so that you can determine where you need to punch. Install the TV bracket and buckle the wall, and then measure this height. (You can choose any point, just as a reference.)
First determine one point, then fix the installation base on the wall, put it on the horizontal meter, determine the level, determine another point, the straight line is determined.
3. Fixed punching
The diameter of the drill head should be selected according to the size of the expansion screws. When punching, you should gently drill to prevent drilling, and then you can start drilling. Can.
Put the expansion screw, then put it on the base, and tighten the nut with a wrench.
Because there is a hole at the bottom that is very close to the embedded tube, a hole is hit at the top.
Tighten your own wrench and tighten it.
Turn the screw up with a built -in wrench, and it is recommended to wear gloves.
When the screw is screwed, you must put the horizontal instrument to ensure the level.
In the process of upper screws, the horizontal instrument should be placed, and adjustments are made at any time to ensure that the bracket level is installed.
Don’t twist the screws at all, fix it first, and then tighten other screws. After looking for flat, tighten the screw in the diagonal direction.
When twisting the screw, don’t twist it at once, just hold it first. After looking for it, follow the diagonal direction to tighten another screw, and finally tighten it.
Finally, put on a plastic cover, although I don’t think it is very useful, let’s get it.
4. TV installation
This must be found to help, one or two can’t get it. Because two people lift the TV, one person fixes the screw.
After fixing, sit on the sofa and look at the inclinedness. After finding a suitable angle, you can tighten the screw behind.
The last step is the thread.
If you make great achievements, it is finally installed.
Fourth, summary
In fact, the purpose of writing this article is to provide you with a little idea, suitable for friends with strong hands -on ability or friends who want to try. Of course, if you can find the master to install it, you can find the master. After all, this life is still very laborious.
Some unprofessional places, I hope everyone forgive me.