The bedside wall light is elegant and harmonious, and the environment can be embodied in elegance and rich. There are many shapes in the bedside wall, which can be changed to the entire bedroom. The controllability of the wall light is very controllable, and it is convenient to create a different bedroom atmosphere. The bedside wall light is generally installed above the bed, 1.5M-1.7m from the ground. The purchase of bedside lamps can be considered from the aspects of lamp quality, lighting brightness, lamp size, practical performance, etc., followed by Xiaobian to understand the installation position and installation of the bedside wall light.
First, where the bedside wall light is installed in?
The wall light of the bed is generally installed on the upper left position of the bed. The lamp can rotate, easy to read, then what is the installation location of the bedside lamp?
1. The installation position of the bedside wall lamp is usually above the bed, and there is generally a double-headed wall lamp or two sides, which are three. But to remind it that if you don’t reserve the wire head on the wall before the renovation, it is best not to choose the wall light as a headlight. Because the wall light is often mounted in the middle position of the wall, there is no dark line, it is necessary to pull a wire on the wall in the position of the wall, so that the smooth wall is not beautiful.
2, the bedside wall light switch should be touched, no matter what the bedside wall light is selected, consider whether the luminaire is easy to switch and regulate. If the switch of the bedside wall light does not make people reach the hand, when you are sleeping, you have to find a switch or adjust the brightness again, so that you are afraid that there is still a few left. . The picture is provided by registered users “technology digital line”, copyright statement feedback
Second, how to buy the bed headlights
1. When the quality of the lamp is purchased by the bedside wall, first look at the quality of the lamp itself. The lampshade is typically made of glass, peli paper, and the like, and the bracket is generally made of metal. The lampshade mainly looks properly, it is suitable for a diffuse material lampshade with low surface brightness, and the pattern and color of the surface should be educed with the overall style of the bedroom. The color should not be too bright, mainly in soft tones. It is also necessary to check whether the metal’s corrosion resistance is good, whether color and gloss are bright and full of important indicators for inspection quality.
2, the brightness of the light is generally the bedside wall light is soft in light, and the degree is less than 60 watts. In addition, according to the installation needs to select different types of bedside wall lights, such as: Use a single-headed wall light in the bedroom, the room is big, use a double-headed wall light; the big space can be selected a thick wall light; contrary, choose a light of.
3, the size of the lamp is generally for the size of the bedside wall, which is mainly based on the actual area of the bedroom, which can not only make the bedroom space has a warm feeling, but also very beautiful.
4, the practical performance bedside wall light is suitable for the choice of dimming bulbs, which can be adjusted in the reading, which adjusts the softness of the adjustment during sleep, so you can do not affect sleep, especially some girls don’t dare to sleep. Especially need to be dimmable bedside wall light. Of course, if it is a double bed, it should be chosen the bedside wall light of the dimming switch so that one person does not look at the interference when one person will read the book. Finally, pay attention to it is best to select the bedside wall lamp with a protective cover, which prevents danger.
Third, the installation method of the bedside wall light
1. Brushing method uses a brush to brush the rubber adhesive on the bonding surface, which is the simplest method of easy and most common methods.
2, spraying method for low viscosity adhesives, can be sprayed with ordinary oil paint spray guns. For those high viscosity adhesives that are short, difficult to clean, can be used to enhance the plastic industry from the Burt spray gun. The advantage of the spraying method is that the glue is uniform, highly efficient; the disadvantage is that the gum loss is large (about 20 ~ 40%), and the solvent is dispersed in the air to pollute the environment.
3. The self-flowing method is used by rain. This method is ideal for flat plate parts, very high efficiency, suitable for mass production. In order to make the gum do not block the nozzle, the gel used must have appropriate viscosity and fluidity. Fourth, the height of the bedside wall light is suitable for the installation of the bedside wall lamp. There is no special requirement, mainly to see the height of the bed, generally approximately about five to one meter or so. If the wall light is a wall, that is probably left to 40 cm to 40 cm. If the height of the bed is 45 cm, plus the total height of the mattress is 90 cm, the height of the wall light should be higher than 90 cm and need to be installed on the bedside table.