A few days ago, Grandpa’s house was renovated, and a group of old PVC tubes were replaced. Huahua wanted to throw away, but Grandpa quickly stopped and told me: “This PVC tube is strong. Okay, save space, be chic in shape, better than flower pot species! “
PVC tube making flower stand
The following 5 pictures authors: glass loofah
1. Prepare a PVC tube with a diameter of about 16 cm in diameter, about 120 cm in length, and prepare 2 joints.
2. The two ends of thepvc tube leave a distance of about 5 cm each and block it with the joints.
3. In the middle of the PVC tube, open a groove as shown in the figure below. Do not throw it away by the cut PVC tube, and then use it.
4. Cut the cut PVC tube for 2 slices, each width of about 4 cm.
5. Like the picture below, the two PVC pipes cut down with screws are twisted under the joints of the two ends as the legs of the flower stand.
6. In the last step, it is filled with soil in the PVC tube, and beautiful flowers are planted.
7. If you want to save more space, you can do this, wear it with threads, and do several layers.
PVC tube three -dimensional planting rack, eat food throughout the year
1. According to the size of the balcony railings, intercept the PVC tube of different lengths, and prepare the supporting elbows, three -way heads, and PVC watering. Note that the diameter of the PVC tube is best not less than 10 cm!
2. Follow the size design of the PVC pipes and watering with each connector and watering in advance, and fix it on the balcony railing with iron wire and rope.
3. As shown in the figure below, on the PVC pipeline, a number of gardens are hit.
4. Put the soil in the tube or add water, and then plant the vegetables or flowers, it is OK ~!
5. If it is too troublesome to hit the hole, you can also directly formula, which is more convenient, but if hydroponic, the plant is not very fixed.
PVC tube for vertical planting baskets, saving land
1. Find a PVC tube with a length of more than 80 cm and a diameter of more than 15 cm.
2. Use a pencil on the PVC tube, every 10 cm, staggered a vertical line of about 5 cm.
3. After the line drawing is good, use the saw to see the vertical line of the painting. Note that don’t completely saw it, only the 5 cm of all the vertical lines is sawed.
4. After seeing it all, bake the incision with a fire machine.
5. Taking advantage of the heat, use a PVC tube or stick with a small diameter, press the incision to press down one end. Note that the direction of all incision is consistent.
6. After all the incision is pressed, seal the interface at the bottom, and a vegetable and flower -breeding artifact is completed!
7. Fill the soil in the middle of the PVC tube and plant the favorite flowers and vegetables.
It looks good!
This effect after planting flowers!
Super luxury dense planting PVC planting rack
1. Find a PVC tube with a diameter of more than 30 cm and several bend joints. According to the diameter of the connector, use an electric drill on the PVC pipe body.
2. The effect after the hole is finished, as shown below.
3. Put all the bending joints on the fire slightly, slightly soft.
4. While it is hot, paste the bent connector into the round hole of the PVC tube.
5. The effect of all elbows is taken, as shown in the figure below!
6. Finally, put the soil into the PVC pipe, and plant your favorite flowers and plants!
The small PVC tube can make so many planting patterns,
I really admire the wisdom of flowers!
If the flower friends like it,
You can do it by yourself, or share it with more people who like to grow flowers!