Self-warming Dundown rabbit is in progress ~
Hi, everyone, share my hand of the letter to the ipad protective cover.
First finished product, Jiangjiang Jiangjiang ~
The envelope has an excellent embroidery sticker at our small Dundown, and the meat is really super cute!
Say, I have recently been fascinated by the surrounding rabbit rabbits as the same as Dundown, and I still met a small box yesterday, I haven’t been happy ~
It is estimated that it will be on the road around Dun Town, the more you go ~ Yue ~ far ~
Ok, iPad protective cover is very simple, you can use it for newcomers, just need sticking.
First of all, I draw a white paper, draw the desired envelope protective sleeve, fix it with paper tape, open and closely, the model can be referred to when cropping cloth.
I have prepared three fabrics, a silver gray is a base color brocade as a display, and a pink wool is selected with the iPad. In order to enhance protection, it is also picking up the rubber lining, clip. Between the beta and lit.
Woven brothing is easy to draw, so it is equipped with a pink lace. The border of the bag can be bought at the store of the cheongsam cloth, such as the sale of brocade, Xiangyu yarn.
Place the iPad in the middle of the trine, leave a space in the left and right, and leave a sewing amount around.
Painting the envelope shape on the Librane in the paper sample.
There is a rollover experience – I have designed two small radians, but I didn’t take into account the thickness of the overall thickness after the lining, led to the end, the portion of the small curve was too narrow.
If you have to try it, please leave a space in this step.
According to the ribbed shape, the other two fabrics also cut into the same size.
Next is the accessory of the envelope, a pair of round magnets, and a embroidered tablets of a rabbit face.
Take them in the fabric than the pen.
Align the magnet position of the lining and the beta, and stick the magnet between the two. It is very convenient to use the steps of self-contained glue, saving seams or hot lining.
When sticking, you should pay attention, first tear a part, determine the alignment, then continue to tear continuous stick, the glue on the lining is very sticky, and you can’t modify it.
Sticking to confirm that the finished product will be sure!
Sticking the lining of the lining, and the front of the lit, the part of the bag is revealed down, and the three are sewing together.
I am afraid that I can fix it with a bead pin ~
In the upper part of the envelope, the gray line portion in the figure, I don’t have a bag, only in the place where it is outside.
Leave a small mouth to turn over, turn over, finish it, then use the hidden needle method to seize the small mouth.
Here I design two small arcs are too narrow, but they have to give up and change to both ends.
And, the end of the bag is not flat enough, I will cover the seam with a small band, and it can be used in the future, or when charging is used to fix the charging wire head.
Then, on the remaining wool cloth, draw a circle with the embroidered tablets, and cut it.
The case where the suture is required to be sutured with the IPAD, and the small clamp is fixed, and the needle method is stitched.
The iPad will see if the width will be loose or too tight, and no problem can be performed.
The circular embroidered sheet is placed at the envelope seal, and the two magnets suck the position and fixed with a glue gun.
The back of the embroidered film continues to fix the wool with a glue.
Fortunately, I chose the wool fabric won’t draw, saves the steps of the lock, and the film gun is sticking!
Gray and pink are very matching, the same is exactly the same as the pink nose of Dunge, cute and fry, I am very satisfied ~
The iPad protective sleeve is not long, I use a TV dating while watching a side seam.
In the middle, I still have fun, and I have used a concert time to get it. Everyone is interested in trying at home!
Bench, sister, Li slowly
Endowed Dun Town ~