Talk about those things about decoration and share various experiences and knowledge of decoration. Hello everyone, I am talking about decoration, and I can learn more about the decoration!
Many people find that the sockets at home are not enough after the decoration is completed, but it is too late to change at this time …
At this time, many people will choose to use a plug -in board to meet the electricity needs. After a long time, they will find that there are electric wires everywhere at home, which is quite unsightly and affects life. In this issue, talk about the decoration for everyone to sort out a full -house socket layout map to do
It is more convenient for everyone to understand how to communicate with the master at the bottom of the water and electricity.
living room
The living room is the center of the family. For the design of the switch socket, it is also necessary to determine the living habits. Only in this way can it use it most convenient.
switch:
Two switches 2: the porch and the main light, the height is designed at 1.3 meters away from the ground;
Decorative effect light switch: This is designed according to whether there is design, usually with the double -press switch.
socket:
TV position: 3-5, mainly for the connection of TV devices, as well as the power demand for wireless WIFI.
Remember to reserve weak electric sockets here
It
Air -conditioned socket: 1, decide whether to put the cabinet or wall hook according to your own needs, so the position of the socket is also different. The cabinet is 0.3 meters high from the ground.
1-2 on each side of the sofa: it is necessary to reserve sockets on both sides of the sofa, but there are two types of reserved locations. The first is on the left and right sides of the sofa, 0.3 meters high; The side is 0.3 meters, and the other side is placed on the sofa. The ground is about 1.2 meters high, because the sofa on one family sofa is against the wall, so the design is more appropriate on the scene.
Projection: Many families now use projectors, and the projector is divided into two types on top and on the desktop. If it is placed on the top, a socket must be reserved according to the design requirements.
Smart Home: If there are smart homes such as smart curtains, monitoring and other smart homes in the living room, the corresponding sockets should be reserved to ensure the electrical needs of the equipment.
Reserved: 1-2, mainly used for other equipment at home, such as floor sweeping robots, and so on.
Deep expansion:
For the living room, the cutting of the socket location is the most difficult to design, because this position has a lot of changes, and the main reason is that there are many options.
There are three changes in the design of the TV wall socket:
1. Is the socket on the TV or below. Put it up and use it to put it more beautifully.
2. Is the number of sockets plus the plus rows, or more sockets;
3. If the TV source line of the TV is hidden, it is more beautiful.
Here I give the socket design method for most people on the TV position, which is also a reference choice. The socket of the TV wall is designed under the TV cabinet, so that the TV cabinet can be blocked and the aesthetics are stronger. As for the number of sockets, it is recommended to be more reserved, and it is normal for 3-5. In addition, the weak electric socket must be reserved to ensure that the wireless router can be installed here in the later period.
If you feel that there are too many sockets, you can also install an insertion in the later period. This is based on personal use habits, but the number of 3-5 sockets reserved before is enough. In addition, the hiding of the TV is reserved in the wall during the construction of hydropower, so that the wires cannot be seen in the later period.
Dining room
As a heavy place for life, the number of design places to be reserved in the design of the switch socket is not much. This is mainly because the area is often not large, and the demand for electricity is often not very large.
1 switch: As for single, double -open, three open, this depends on whether there is a ceiling.
1 refrigerator: The area of some family kitchen is too small, so the restaurant closest to the kitchen is the best place to put in the refrigerator, so the corresponding socket is reserved.
1-2 on the dining table: used to eat hot pot and some electrical appliances;
Reserved 1-2: Vacuum cleaners, electric fans, etc. used for daily lines to use it.
kitchen
The kitchen is a place for the family to make food. It has the importance of “golden kitchen”. Although the area of the kitchen is not large, the number of appliances that needs to be used is large. use.
1 switch: used for the use of main lights, auxiliary lights, and cool bulb.
3-5 above the cabinet: This is designed according to the layout of the kitchen. The same is true for the specific location. It is not fixed, but stay away from the stove platform, and the height is between 0.12-0.3 meters above the table;
One range hood: If it is a traditional range hood, the socket is left between 1.8-2.2 meters and is determined according to the style of the range hood; if it is reserved below, 0.3 meters away from the ground;
Two below sinks: used for the power consumption needs of other equipment such as the small kitchen treasure;
1 steam box and oven: designed according to the cabinet drawings, reserved the height;
1 disinfection cabinet: usually placed behind the disinfection cabinet, 0.3 meters away from the ground.
1 dishwasher: Reserved next to the dishwasher, 0.3 meters from the ground.
For the design of the kitchen’s switch socket, as long as the merchants who are able to customize the custom cabinet, the merchant designer will design an electrical screen according to the needs, and then the master can design it according to this drawing, which can save a lot of unnecessary trouble.
If you want to make the cabinet high and low, and think that it is easier to use later, then the socket on the table should pay attention to the height. The high -platform socket can be 12cm from the table, so it is convenient to use.
At the same time, the socket on the table is recommended to use a switch in the later period, so that it is convenient to use it. You do n’t need to pull out the socket, and you can open and disconnect the socket power supply.
bedroom
As a space for rest, the bedroom must ensure that the switch socket is controlled without getting out of bed when designing, and at the same time, it must be a full signal of the wireless network line, which is in line with the current needs of life.
2 multiple control switches: used for the left and right sides of the bedside, so that the lamps can be turned off on both sides of the bedside, which is more convenient to use;
1 main light switch: used to enter the bedroom to control the main light to use;
1-2 auxiliary light switches: bedroom lights for ceiling design.
1-2 bedside positions: used for mobile phone charging;
1 bay window location: electricity needs for bay window positions;
2-4 plants of the bedroom TV wall: used for TV use;
1 socket reserved: used for the use of electric fans;
1 weak electric socket: It is used to ensure the stability of the wireless signal of the bedroom and the device with the demand for network cables.
For the switch and sockets of the bedroom bedside table, it must be paid attention to, because if it is not done well, it will be blocked by the bedside table.
The height design of the switch socket in this position has two sizes:
The first height is 0.6 meters, which is used for general bedside tables;
The second height is 0.75 meters, which is used for high bedside tables.
In most cases, the height of the bedside cabinet switch socket is 0.6 meters, so that it is enough. If the home is American style and light luxury style decoration, then pay attention, because this type of bedside table often reserves 0.75 meters from the switch socket, so that after the bedside cabinet is placed, the switch socket is not blocked and affects the use of use. Essence
bathroom
As a bath in the family, it has the importance of “Silver Guard”. As a bathroom, it is also very small, but the design requirements for switch sockets are high.
1 main light switch: used for the main light switch of the bathroom shack;
1 Yuba switch: Used in the Yuba switch in the bathroom;
1 front light switch: used for controlling the front light switch control.
1-2 next to the facial washing pond: used for the use of equipment and other equipment;
1-2 in the bathroom cabinet: used for the use of the power supply of the kitchen and the hidden equipment;
1 in the mirror cabinet: used for charging for hidden equipment;
1 toilet 1: Used for smart toilet.
1 water heater: the power demand for electric water heaters;
Electric towel rack: used for the power needs of the device.
balcony
Whether it is used as a living balcony or a leisure balcony, it has a demand for electricity, especially for the balcony of life.
1 main light switch: used for the use of the main lights of the balcony.
1 drying rack switch: used for lifting the drying rack for use.
1 washing machine: Used for washing machine;
1 dryer: Used for dryer;
Reserve 1: Used for other equipment in the later period.
The design of the balcony switch socket is not difficult, and it is not simple to say. The focus is on the design of the washing cabinet.
This position is reserved, the washing machine is well played, and it is also convenient to maintain it later, so the focus is on explanation.
Usually this position is to put a washing machine, then the cabinet door on the left and the right side are the washing machine to explain.
During the construction of hydropower, all the waterways and circuits must be reserved on the left. In this way, it is convenient for installation and post -maintenance after opening the door. There is no cover behind the washing machine, which also allows the washing machine to maximize it.
Finally, talk about the decoration and summarize for everyone:
There are 15 pictures, not many, and the graphic and text can meet the needs of most small partners. The principle of the design of the socket is that it is better not to be more, and the proper reserved!
The above content is talked about the original decoration, the picture originated from the Internet, the infringement is deleted, thank you for your reading!
switch:
switch:
switch:
switch:
switch:
socket:
socket:
socket:
socket:
socket:
Deep expansion:
Deep expansion:
Deep expansion: