In this season of spring flowers, with a masochistic heart to death, I discussed with my girl to knit her a sweatshirt. Unexpectedly, the girl was particularly demanding: her body was white, the bottom of the hat sleeve pocket was fluorescent green, and she had to embroider the headband logo of her pink character Gray and Gray’s weapon slash.
Also have 2 ears on the hat. I basically tried my best to weave according to her requirements, except that I didn’t knit my ears, tried knitting a few times, didn’t fancy it, and gave up.
The whole process is weaving and dismantling and weaving, no less effort, the illustration is also hand-drawn, there is no on the Internet, ready-to-wear is very satisfied, not in vain, the girl is still at school, the resident students will not come back until next weekend, there is no reality show, and it has not been washed, wait for her to come back and change it, today first post to commemorate it, the process is difficult, the weaving notes are also very detailed, very lengthy, sorted out in the morning, it is not easy to post, like the sisters to support more, thank you!
Thread: white wool mixed thread, green segment dyeing hoarding thread
Dosage: white 303g, green segment dyeing more than 7 balls
Needle: domestic 10-gauge ring needle plus straight needle
Ready-to-wear: chest circumference 48cm*2, length 60cm, shoulder width 42cm
Reference height: 150-165cm, woven from top to bottom
Weaving Notes:
1. Machine collar: green segment dyeing thread long tail method starting needle 118 needles, sheet weaving machine collar, 3 rows down, one row up, 4 rows down, folded in half along the upper needle row, one-to-one merge with the starting needle row, weave the machine collar.
2. Hat: 118 needles of the sheet knitted hat without addition or subtraction of the whole lower needle to measure 28 cm from the collar of the machine, and begin to prepare the needle collection of the top of the hat, the needle collection law is: 2-2 (left and right 1)-7, 1-2 (left and right 1) -3. All needles are collected on the front side, then folded in half, the reverse side is outside, and the needle on the needle is flattened with the 3-needle receiving method, and the thread is broken.
3. Brim: from the right side of the hat along the brim of the hat in the way of 3 to 2, pick the entire brim, a total of 152 stitches, round trip 4 rows, leave a rope eye at the 11th stitch position of the 5th row, continue to weave, weave 18 rows of sets, fold it in half, and use a sewing needle to stitch one-to-one with the starting row. Weave it as follows:
4. Yuke part of the upper body: 118 needles on the collar of the machine, the left brim and the right brim of the sweater are calculated according to 6 needles, and the number of stitches in the collar = 118+6+6=130 needles. Then assign the number of shoulder stitches by the shoulder yuke diagram.
The marking clasp is placed in the middle of the four tendons and 2 needles. The shoulders are woven with white sheets at the front and back, and the sleeves are finally braided. First knit the back piece, and pick 50 needles along the row on the machine collar by knitting the needle method from the reverse side = 1 needle on the left shoulder + 2 stitches + 44 stitches + 2 stitches + 1 stitch in the right shoulder from the reverse side. One stitch on each shoulder is used as a side needle, and it is also used as a side needle to facilitate the sleeve knitting on the side needle later.
Pick the needle, return to the front, the side needle and 2 needles tendon have been knitting the needle, only add a needle in the front row adjacent to the left and right sides of the back piece and the tendon, and do not add the reverse line, 2-1-33, at this time the number of needles in the back piece = 33 + 44 + 33 = 110 stitches. At this time, the number of stitches on the needle = 1 + 2 tendons + 110 back slices + 2 tendons + 1 = 116 stitches. Use 2 marking buckles respectively to put the left and right needles on the left and right side of the needle 1 pin buckle on the mark buckle, remove from the needle, at this time the needle is left 114 stitches, start to weave the front and rear sheet drop, the whole needle does not add or subtract 12 rows, use 2 mark buckles respectively to put the left and right needles on the left and right side of the needle 1 pin buckle on the mark buckle, remove from the needle, at this time the needle is left 112 stitches, the needle is broken.
Start weaving the front piece, pick the needle method is the same as the back piece, and pick 6 needles on the left and right brims. The weaving method is the same as the back piece, after adding the needle according to 2-1-33, the number of needles on the needle = 1 + 2 tendons + 110 back piece + 2 tendons + 1 = 116 stitches. Use 2 marking buckles to mark the left and right needles and 1 tendon needle on the needle for a total of 2 stitches and remove them from the needle, leaving 112 needles on the needle. At this time, the front and back pieces are connected to prepare for weaving, and 8 stitches are added to each armpit. Place the marker buckle at the starting point. Number of body stitches = 8 stitches under the armpit + 112 stitches in the back + 8 stitches under the armpit + 112 stitches in the front piece = 240 stitches. String the needles on the left and right side of the buckle with a pin and remove the buckle. Upper body Yuke complete.
5. Body. Loop knitting 240 stitches on the front body, full down needles. Weave 48 lines and start weaving pockets. The illustration of the pocket is as follows
Replace the pocket with green segment dyeing yarn. Weave and put it away. Pick 50 stitches along the top and back of the pocket, continue to weave the white coil in 68 rows, merge with the bottom end of the pocket, continue to weave 8 rows of white, and sleeve the broken thread. Change the green segment dyeing thread in the penultimate row of the white reverse to pick 240 needles one-to-one, knit 3 rows of lower needles, one row twist down the needle and one needle, start to weave 16 rows of single thread, single row down knitting twist needle, double row normal weaving, weaving 16 rows, single thread needle receiving method. Use a sweater needle to stitch the pocket with the body. The appearance of the stitching is as follows
6. Sleeve: first knit the right sleeve, pick 17 stitches along the machine collar, directly pick the needle on the side needle of the front and rear pieces to weave, pick 1 needle on the front row and 1 needle in the front and back sheets, and pick the reverse row without picking the direct knitting, a total of 33 times, pick 10 stitches in the front and rear pieces, and pick 8 stitches under the armpit. The side needle of the front and rear pieces is combined with the 33rd needle plus needle, and the other needles are moved from the pin to the needle, at this time the number of sleeve needles = 1 tendon + 33 needles + 17 needles + 33 needles + 1 tendon + 10 anterior and posterior drops + 8 armpits = 103 stitches. Start weaving.
Sleeve subtract needle rule 3-2-9 minus 18 needles remaining 85 stitches, 6-2-5 minus 10 stitches, remaining 75 stitches, 8-2-7, 4-1-1, minus 15 stitches remaining 60 stitches, then evenly lose 8 stitches in one row, remaining 52 stitches, knit a row and twist the needle one by one, start knitting 18 rows of single threads, single row down knitting twist needles, double rows of normal weaving, weaving 18 rows, single thread needle receiving method. End the right sleeve. Pick 42 knitted single thread 6 rows on the left and right of the pocket, single row down knitting twist needle, single thread needle receiving method ends. According to the illustration of the cross stitch on the chest below, the left sleeve needs to wait for the left chest cross stitch to be embroidered before weaving, and the left sleeve is woven with the right sleeve.
7. Illustration of cross-stitch on the chest
8. The white bottom edge has been changed and changed, and the picture is also attached as a reference.